Mobiltemp SHC 32

Mobiltemp SHC™ 32 is a supreme performance antiwear grease primarily intended for high temperature applications. It combines the unique features of polyalphaolefin (PAO) synthetic base fluids with those of an organo-clay, non-soap thickener.

Product Description

The excellent resistance to thermal/oxidative degradation provided by the PAO base, coupled with the excellent high temperature structural stability and high dropping point of the clay thickener result in outstanding high temperature greases. The wax-free nature of the synthetic base fluid and its high viscosity index also provide superior low temperature lubrication as well as excellent film protection at high temperatures.

Because the PAO base oil has low traction properties (compared to mineral oil), Mobiltemp SHC Series also offer the potential for energy savings through reduced friction and lower torque, and reduced temperatures in the load zone of rolling element bearings. The Mobiltemp SHC Series is available as three products: Mobiltemp SHC 32 is an NLGI 1 1/2 grade with ISO VG 32 base oil; Mobiltemp SHC 100 is an NLGI 2 grade with ISO VG 100 base oil; Mobiltemp SHC 460 Special is an NLGI 1 grade with ISO VG 460 base oil, plus molybdenum disulphide for extra wear protection

Applications:

Mobiltemp SHC 32 grease offers excellent high temperature grease life, bearing protection and grease integrity along with excellent low temperature capability and good wear protection.

• Sealed or re-packable ball and roller bearings
• Splines, screws and some enclosed gearing
• Extreme temperature applications with a recommended operating temperature range of -50º C to 180º C (with appropriate relubrication intervals).

Specifications and Approvals

Mobiltemp SHC Series meets or exceeds the requirements of:	32	100	460 Special
DIN 51825: (2004-06)	KPHC1-2K-50L

 

Typical Properties

Mobiltemp SHC Series	32	100	460 Special
NLGI Grade	1.5	2	1
Thickener Type	Clay	Clay	Clay
Color, Visual	Red	Light Brown	Grey
Penetration, Worked, 25ºC, ASTM D 217	315	280	325
Dropping Point, ºC, ASTM D 2265	260+	260+	260+
Viscosity of Oil, ASTM D 445
cSt @ 40º C	32	100	460
4-Ball Wear, ASTM D 2266, Scar, mm	0.7	0.4	0.4
4-Ball Weld, ASTM D 2596, Load, Kg	200+	200+	250+